Buy Now In Stock
The classic sugar bead mold produces a string of textured round sugar beads that add a dramatic, cascading chandelier effect to any cake design. Made of the highest quality food grade silicone to produce an extremely durable silicone mold that is tear resistant and can withstand temperatures to 200°C/ 400° F.
Uses: Isomalt, Cooked Sugar, Hard Candy etc.
Non-Food Uses: Soap, Wax, Plastic, Casting Resin etc.
Bead String Length: 5 3/4" (Each bead has a diameter of 1cm.)
Things You Should Know:
1. Do not fill the mould to the top of the blade that rises up around the mould cavity. The mould should be filled to the top of the cavity which is level with the lip and the point where the blade starts to rise from the surface of the mould, people naturally will fill a mould to what they think is the top. If you fill to the top of the blade, the resulting piece will be too thick and not the way it was designed.
2. Put corn starch (corn flour) in a stocking, nylon, musline tie shut to make what we call a pounce. Roll out fondant, sugar paste to the appropriate thickness , dust lightly with corn flour and put dusted side down onto mold. Press with palm of hand and fingertips forcing fondant into all the details. The blade will already start to cut the fondant. Take a light rolling pin and roll across the top of the mould. DO NOT PRESS HARD. LIGHT QUICK STROKES WORKS THE BEST AND ENABLES THE BLADE TO PERFORM PERFECTLY! ONCE THE FONDANT HAS BEEN TRIMMED AND THE EXCESS IS TAKEN AWAY PRESS FONDANT AGAIN REAL QUICK AND THEN PLACE YOUR FINGER ON THE SIDE OF THE BLADE AND PRESS IT SIDEWAYS TOWARDS THE CAVITY AND DOWN INTO THE CAVITY. This removes any little bits of fondant flashing and makes a perfect edge.