Ratings & Reviews

Average 100% (9 reviews)

16 September 2014

Brilliant kit. Is amazing what you can produce


12 September 2014

Despite being our first use of this and our project being rather ambitious, our guests were impressed and delighted at the results. Great fun!


11 September 2014

Stuck to first thing I did, so had to replace it. Needed to very lightly grease the thing I am taking a mould of.

Read more reviews on Feefo

Silicone Plastique Putty Mould Making Kit 400g

£24.95

Product Code: 3906

Silicone Plastique is an amazing, food grade silicone mould making putty that has the consistency of cookie dough and is very easy to mix and apply. Created by a chef in order to bring the art of mould making into both commercial and home kitchens.


Silicone Plastique has become a valuable tool in the creation of custom food moulds around the world. Mould making has always been considered a complicated task, yet with this silicone mould putty a new world of easy mould making has been made possible.


Once mixed, Silicone Plastique will stay workable for about 15 minutes giving ample time to make an accurate and well-made mould of almost any object. Cure time is only about an hour at room temperature to create a pliable yet durable rubber mould suitable for direct food contact. This amazing mould putty can be put in the freezer without losing flexibility and resists temperatures as high as 230°C.


 



 


(Durometer) Shore Strength: 35


Silicone Plastique is outstanding to make moulds for: Chocolate, Butter, Fondant, Ice Cream, Pulled Sugar, Cheese, Ice, Gelatine, Hard Candy, Gum Paste, Pastillage, Royal Icing, Candy Clay, Butter Cream, Marzipan, Sherbet, Sorbet.


Silicone Plastique will work with any material in the gypsum category. Examples of these materials are: Plaster, Cement, Concrete, terra cotta, clays of all types.


Silicone Plastique will also work with any of the following materials: Casting Resins of all types, Epoxy Resins of all types, Fiberglass Resin, Hot Glue, Air Dry Clay, Polymer Clay (sculpey, fimo, cernit), paper mache, low melt metals.


Materials Silicone Plastique does not mould well are: Spent Uranium, Cryptonite, Mana from Heaven & Molten Lava.


It may surprise you to know that almost half of our mould making customers purchases Silicone Plastique for use with non-food materials. Reasons given are ease of use, high quality from a platinum based curing system and the peace of mind that comes from using a product that is not harmful or toxic.





Instructions:
 


1. Silicone Plastique has the consistency of clay. Equal amounts of Part A (blue) and Part B (white) are scaled by weight or volume.


2. Parts A and B are combined and kneaded until a uniform colour is achieved. Silicone Plastique can be flattened by hand or rolled with a pin between sheets of plastic.


3. A small amount of plastique is rubbed into detail of a medallion. The medallion is pressed into Silicone Plastique that has been rolled out twice the thickness of the medallion.


4. Silicone Plastique has a work time of about 10 minutes and a cure time of about an hour at room temperature. Silicone Plastique should be allowed to fully cure before removing medallion.


5. Chocolate is poured into cured mould.


6. With a flex of the mould, a perfect chocolate copy of the medallion pops out of the mould, ready to garnish your favourite dessert.



 


Re-Moulding Silicone Plastique:


Once Silicone Plastique has cured, it is a commercial grade silicone rubber that cannot be melted or dissolved in order to make another mould. Remouldable materials are usually made of gelatin and have many drawbacks like:



  • The gelatine dries out and the mould shrinks and cracks.

  • Gelatine mould making materials cannot be used for hot applications like cooked sugar and Isomalt.

  • Gelatine moulds perform very poorly when placed in a freezer or frozen.

You might also like